SPECIFICATIONS
-
FRAME
Series 3 6061 Aluminum Frame, 27.5” Wheels, 120mm Travel, MultiTrac Suspension Platform, 148x12mm Boost Thru-Axle, 73mm Threaded BB w/ ISCG05 Tabs
-
FRONT SUSPENSION
Marzocchi Bomber Z2 27.5", Rail Damper with Sweep Adjustment, 130mm Travel, Kabolt Bolt-On Axle, 44mm Offset
-
REAR SUSPENSION
Fox Float DPS, Performance Series, EVOL Air Spring, 3 Position Compression Adjustment, Rebound Adjustment, Custom Tune, 210x50mm, M8x25mm Hardware Top and Bottom
-
RIMS
Marin Aluminum Double Wall, 29mm Inner, Sleeved Joint, Disc Specific, 32H, Tubeless Compatible
-
HUB, REAR
Shimano HB-MT410B, 148x12mm, Centerlock, Microspline Freehub Body
-
HUB, FRONT
Shimano HF-MT410B, 110x15mm, Centerlock
-
SPOKE, NIPPLES
14g Black Stainless Steel
-
TIRES
Maxxis Assegai, 27.5x2.5", MAXX TERAA, EXO, Tubeless Compatible
-
DERAILLEUR, REAR
Shimano SLX, 12-Speed, SGS
-
DERAILLEUR, FRONT
-
-
SHIFT LEVER
Shimano Deore, 12-Speed, SL-7100R, I-Spec EV
-
CRANKSET
FSA Grid, Modular 1x, 32T Direct Mount Chainring, MegaTooth Technology, Boost Spacing
-
BOTTOM BRACKET
Mego EXO 73mm BSA
-
CHAIN
KMC X-12 Silver and Black
-
CASSETTE
Shimano, SLX 12-Speed, 10-51T
-
BRAKE, FRONT
Shimano BR-MT420, 4-Piston Hydraulic Disc Brake, 203mm Rotor
-
BRAKE, REAR
Shimano BR-MT420, 4-Piston Hydraulic Disc Brake, 180mm Rotor
-
BRAKE LEVERS
Shimano BL-M4100 Hydraulic Lever, I-Spec EV Compatible
-
HANDLEBAR
Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back
-
STEM
Marin 3D Forged Alloy, 35mm
-
GRIPS
Marin Single Clamp Locking
-
HEADSET
FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
-
SEATPOST
TranzX, YSP23JL, 1x Remote, Size S 125mm Travel, Size M and L 150mm Travel, Size XL 175mm Travel, 30.9mm
-
SADDLE
Marin Speed Concept
-
PEDALS
-
-
EXTRAS
Bolt-On Thru-Axle
Specifications, pricing, and availability are subject to change without notice.
GEOMETRY
XS | S | M | L | XL | |
---|---|---|---|---|---|
STACK | 579 | 583.6 | 588.2 | 597.3 | 601.9 |
REACH | 410 | 425 | 445 | 465 | 485 |
HEADTUBE ANGLE | 66.5° | 66.5° | 66.5° | 66.5° | 66.5° |
HEADTUBE LENGTH | 105 | 110 | 120 | 125 | 130 |
SEATTUBE ANGLE | 75° | 74.7° | 74.5° | 74.3° | 74.1° |
SEATTUBE LENGTH | 330 | 380 | 425 | 470 | 515 |
TOPTUBE EFFECTIVE | 570.6 | 586.8 | 608.1 | 632.9 | 651.9 |
BB HEIGHT | 338.5 | 338.5 | 338.5 | 338.5 | 338.5 |
BB DROP | 18 | 18 | 18 | 18 | 18 |
CHAINSTAY | 430 | 430 | 430 | 430 | 430 |
WHEELBASE | 1129.4 | 1146.3 | 1168.3 | 1192.3 | 1214.3 |
STANDOVER HEIGHT | 647 | 665 | 702 | 727 | 768 |
FORK OFFSET | 44 | 44 | 44 | 44 | 44 |
SEATPOST DIAMETER | 30.9 | 30.9 | 30.9 | 30.9 | 30.9 |
HANDLEBAR WIDTH | 780 | 780 | 780 | 780 | 780 |
STEM LENGTH | 35 | 35 | 35 | 35 | 35 |
CRANK LENGTH | 170 | 170 | 175 | 175 | 175 |
All lengths in millimeters
SUSPENSION SETUP
REAR SHOCK SETUP
Recommended Sag = 30%/15mm
Step 1: Set correct pressure in rear shock.
Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).
Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.
Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.
Step 5: Adjust rebound setting to ensure proper control.
FORK SETUP
Marin recommends that all bikes front and rear suspension feel balanced
Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.
Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.
Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.
FOX FLOAT DPS
LBS | KG | PSI |
---|---|---|
120 | 54 | 140 |
130 | 59 | 145 |
140 | 64 | 150 |
150 | 68 | 155 |
160 | 73 | 166 |
170 | 77 | 177 |
180 | 82 | 190 |
190 | 86 | 201 |
200 | 91 | 212 |
210 | 95 | 224 |
220 | 100 | 237 |
230 | 104 | 250 |
240 | 109 | 263 |
250 | 113 | 277 |
260 | 118 | 292 |
270 | 122 | 307 |